Factory Cheap Hot COB LCD Display Module to America Manufacturer
Sinda Display Technology Co., Ltd. is one of the best China COB LCD display manufacturers and suppliers. We can custom COB LCD display exactly according to your request and provide sample for quality evaluation in 2 weeks. Now we are provide COB LCD display for instrument like digital panel meter,multimunction meter,elevator, POS machines, LGP Dispenser, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock & Watch,...
Factory Cheap Hot COB LCD Display Module to America Manufacturer Detail:
Sinda Display Technology Co., Ltd. is one of the best China COB LCD display manufacturers and suppliers. We can custom COB LCD display exactly according to your request and provide sample for quality evaluation in 2 weeks. Now we are provide COB LCD display for instrument like digital panel meter,multimunction meter,elevator, POS machines, LGP Dispenser, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock & Watch, Telecommunications device, Home Appliance, Industrial Controller, Car Audio, Color Display Systems and the other industries, Measurement device, UPS, Solar Inverter.
Product detail pictures:
Related Product Guide:
Factory Cheap Hot COB LCD Display Module to America Manufacturer, The product will supply to all over the world, such as: , , ,
Заказывал тут: https://ali.pub/17x7vy
Дополнительно заказал защитную пленку: https://ali.pub/17x8fe
—————————————————————————————————-Зарабатывай со мной: https://epngo.bz/epn_index/7pls0w
Возвращай до 18% кэшбэка на покупках в Китае c EPN: https://epngo.bz/cashback_index/7pls0w
Возвращай кэшбэк с Letyshops: https://letyshops.ru/soc/sh-1/?r=409764
Наша группа Вконтакте: https://vk.com/techappsadvisor
Замена дисплейного модуля (экрана) Motorola Moto E 2gen в домашних условиях при помощи подручных инструментов.
Replacement of Motorola Moto E 2gen LCD display (screen) using available tools.
Find Sharp RUNTKA383WJZZ Replacement Backlight Inverter Master Boards at ShopJimmy.com:
The Backlight Inverter Board shown in this video is a replacement for the following LCD TV models:
LCD TV Model Numbers:
• SANYO DP46848
• SHARP LC-46LE810UN
• SHARP LC-46SB54U
• SHARP LC-46SB57UN
• SHARP LC-C4654U
• SHARP TL-M4600
Top Common LCD TV Problems for bad Backlight Inverters Boards:
• No Backlight
• Has Audio But No Video
• Dim Video (Back Light)
• TV Turns On, Backlight Inverter Immediately Turns Off
• Buzzing Sound From Backlight Inverter Transformers
• Smoke / Burnt Components On Backlight Inverter
TV Repair Made Easy™
© 2013 ShopJimmy.com, LLC.
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.
To be best prepared to replace the Backlight Inverter Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Backlight Inverter Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let’s get to it shall we?
• Locate your TVs identification label and take note of the brand name, model number, serial number, and model code if present.
• Unscrew and remove the back cover.
• The Backlight Inverter is a part of your TV’s LCD Panel Assembly.
• The Backlight Inverter is mounted to the back of the Panel close to the right edge, and can be hidden under a metal or plastic cover.
• These Inverters are given different numbers or are named Master & Slave, depending on their location and function.
• Backlight Inverters are connected to the panel via small wires or lock into a series of small slot connections built into the panel.
• Carefully unplug all wires by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Unscrew and remove your bad Backlight Inverter Board from the chassis.
• This item is clipped directly to the fluorescent bulbs within the display assembly. To prevent damaging the bulbs, slowly lift the board at one side and allow the tension to release one clip at a time. Lifting the board too hard or too quickly can result in broken fluorescent bulbs.
• Remove the Backlight Inverter from the plastic tray.
• The part number for this item can be found printed on the board.
• Search your part number on https://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Place the Backlight Inverter into plastic tray.
• Reinstall Backlight Inverter onto the chassis. Carefully snap the board into the bulb clips.
• Insert all screws to secure your ShopJimmy New Backlight Inverter Board to the chassis.
• Reconnect all cables.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Backlight Inverter Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.
Thank you for watching one of many tutorials here at ShopJimmy.com! If you have any further questions regarding your repair, simply post a question in the comments section below, or call our award-winning customer service team at the number on your screen! We strive to learn and share new TV Repair Tips everyday. Subscribe to our YouTube Channel and grow with us! Share our videos with your friends, and help us spread the savings! And don’t forget to hit that Like button!
By from -
By from -