Manufacturer for TFT Display Module to Auckland Factories
Sinda Display Technology Co., Ltd. is one of the best China TFT LCD display manufacturers and suppliers. We can custom TFT LCD display exactly according to your request. Now we are provide TFT display for instrument like digital panel meter,multimunction meter,elevator, POS machines, LGP Dispenser, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock & Watch, Telecommunications device, Home Appliance, Industrial Co...
Manufacturer for TFT Display Module to Auckland Factories Detail:
Sinda Display Technology Co., Ltd. is one of the best China TFT LCD display manufacturers and suppliers. We can custom TFT LCD display exactly according to your request. Now we are provide TFT display for instrument like digital panel meter,multimunction meter,elevator, POS machines, LGP Dispenser, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock & Watch, Telecommunications device, Home Appliance, Industrial Controller, Car Audio, Color Display Systems and the other industries, Measurement device, UPS, Solar Inverter.
Product detail pictures:
Related Product Guide:
We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support for Manufacturer for TFT Display Module to Auckland Factories, The product will supply to all over the world, such as: Sri Lanka , Congo , Gabon , Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Yeeeahhh.. please SUBSCRIBE and LIKE this video to support this channel =]
ElectricBikePower on Instagram: https://www.instagram.com/electricbikepower/
This is the correct BAFANG website http://www.szbaf.com/ there are lots of wrong information and “8fun” websites out there confusing people. Research, research and research before making your decision, you may email more than one seller to see how much they know about the product they are selling, ask about warranty, what is covered and what is not, ask about the programming settings if they can enable throttle at PAS-0, most Alibaba and eBay sellers have no idea what they are selling… they won’t be able to help you at all (even if they want). Research before buying!
Playlist with more Bafang BBSHD videos: https://www.youtube.com/playlist?list…
Please SUBSCRIBE my channel and LIKE this video =]
My Fast Electric Bicycle setup:
•Bafang BBSHD 1000w 48v (1455watts peak)
•Custom controller settings with 100% throttle enabled at PAS-0 and no speed limit (unloaded wheel spinning at 102kmh with 46T)
•46 tooth chainring (74.1km/h top speed on flat)
•189 RPM at 58.8v (factory settings 160 RPM maximum)
•Homemade 14s 5p 58.8v 14.5Ah battery pack capacity
•1,5 hours 57.1v fast charge (6A 350w charger set at 57.8v)
•2,5 hours 58.8v charge (6A 350w charger set at 59.2v)
•3.65kg battery pack transported inside my backpack connected to the bike with XT90-S high discharge anti-spark connector.
•70x NCR18650PF Panasonic High Current cells
•Waterproof “bare cells” pack style for better cooling
•No BMS for 100% charge (4.2v per cell) = 100% performance!!
•Range (with BBS02 motor): +/-26km in the city / 36km continuous full throttle with only few stops
•V3 Cycle Analyst with with 1.00m ohms shunt
•Bafang C965 5 buttons display
•15 watts LED headlight
•Waterproof red LED voltmeter to monitor battery sag and performance during the ride.
Throttle / Brake Sensor:
•Left thumb throttle (connected to the BBSHD controller) adapted to road bike handlebar, set up between the brake lever and the bar (almost invisible) mounted on a copper T-joint (used for plumbing, same thickness as the handlebar) the long bit cut in half riveted to the bar with the other bit sticking out enough to mount the throttle.
•Magnetic cut-off sensor in line connected to my mechanical rear brakes
•9kg Trek Road Bike
•Easton (rear) Shimano (front) performance 700c racing wheels with aerodynamic flat spokes
In this project, we will interface a DS1307 Real Time Clock(RTC) with AVR ATmega32 microcontroller and LCD Display. Here, we will read time(Minute and Second) from the DS1307 RTC and we will display the minute and second values in a 16X2 alphanumeric LCD. The data communication between DS1307 RTC and AVR ATmega32 microcontroller takes place using TWI(Two Wire Interface) communication protocol. But before reading the DS1307 RTC, the DS1307 RTC needs to be initialized with second and minute values. The DS1307 RTC is initialized only once. We will initialize both the minute and second values of the DS1307 RTC with 0(Clock will start with 0 minute and 0 second). You can change the initialization values according to your need by changing the initialization values in the DS1307 write section of the code. After initialization of DS1307 RTC, the AVR ATmega32 microcontroller will read the minute and second values from the DS1307 continuously through two wire interface communication and it will display those minute and second values in the 16X2 alphanumeric LCD. Download All the required project materials like C Code, Circuit diagram and PDF absolutely Free from the below link:-
By Elva from Bahamas - 2016.04.28 15:45
Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
By Constance from Munich - 2016.05.02 18:28