High definition wholesale COG LCD Display Modules to Manila Importers

Short Description:

COG LCD Display Modules(Chip-On-Glass) Chip-On-Glass (COG) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (ICs) on glass substrate directly by using Anisotropic Conductive Film (ACF). The pitch of the IC bumps (footprint) can be scaled down according to customers’… COG LCD Display Modules(Chip-On-Glass) Chip-On-Glass (COG LCD Display Modules) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (...


Product Detail

Product Tags

Related Video

Feedback (2)

We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Display Module , LCD Screen For Car , Seven Segment Display , If needed, welcome to make contact with us by our web page or phone consultation, we will be delighted to serve you.
High definition wholesale COG LCD Display Modules to Manila Importers Detail:

COG LCD Display Modules(Chip-On-Glass) Chip-On-Glass (COG) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (ICs) on glass substrate directly by using Anisotropic Conductive Film (ACF). The pitch of the IC bumps (footprint) can be scaled down according to customers’…

COG LCD Display Modules(Chip-On-Glass)

Chip-On-Glass (COG LCD Display Modules) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (ICs) on glass substrate directly by using Anisotropic Conductive Film (ACF). The pitch of the IC bumps (footprint) can be scaled down according to customers’ requirements (contact pitch of glass substrate). This method reduces the assembly area to the highest possible packing density, which especially important to those applications that space saving is crucial. It allows a cost-effective mounting of driver chips because integrating flex PCB is no longer required. The IC is bonded directly onto the glass substrate and is suitable for handling high-speed or high-frequency signals.

COG LCD Display Modules technology is one of the high-tech mounting methods which use Gold Bump or Flip Chip IC’s, and implemented in most compact applications. Chip-On-Glass integrated circuits were first introduced by Epson. In flip-chip mounting, the IC chip is not packaged but is mounted directly onto the PCB as a bare chip. Because there is no package, the mounted footprint of the IC can be minimized, along with the required size of the PCB. This technology reduces the mounting area and is better suited to handling high-speed or high frequency signals.

COG is primarily used for source driver ICs within TFT display technologies where they are used for LCD, plasma, e-ink, OLED or 3D technologies. This is essential for consumer electronic products such as notebooks, tablets, cameras or mobile phones with the need for small size and light-weight components.

Advantages: 

Very economical on size. Chip-On-Glass LCD modules can be as thin as 2 mm.

Cost effective over COB, especially in graphic LCD modules, because reduces the number of IC’s.

More reliable than TAB due to TAB’s weakness in the bond area.

Disadvantages: 

COG can only be used at a certain resolution level where the lines are not too fine. At very fine pitches COG becomes difficult to test, and TAB would be the preferred approach.

It may be more cost-effective to use TAB or COB, if a designer has to integrate a keypad or indicator around the display.

The active area is not centered within the outline but offset, because of the area where the circuits are.


Product detail pictures:

High definition wholesale
 COG LCD Display Modules to Manila Importers detail pictures


Related Product Guide:

We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for High definition wholesale COG LCD Display Modules to Manila Importers, The product will supply to all over the world, such as: Uruguay , Argentina , Stuttgart , We will continue to devote ourselves to market & product development and build a well-knit service to our customer to create a more prosperous future. Please contact us today to find out how we can work together.



  • Mitsubishi 5.0″ – AA050MC01 TFT LCD Panel, 800×480 Resolution, LED Backlight.

    For more details please visit us on-

    http://www.encore-electronic.com/mitsubishi/AA050MC01

    This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Josephine from Luxembourg - 2016.07.07 13:00
    This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Adelaide from Rwanda - 2015.09.23 18:44

    Related Products

    WhatsApp Online Chat !