Factory made hot-sale COG LCD Display Modules to United States Factories
COG LCD Display Modules(Chip-On-Glass) Chip-On-Glass (COG) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (ICs) on glass substrate directly by using Anisotropic Conductive Film (ACF). The pitch of the IC bumps (footprint) can be scaled down according to customers’… COG LCD Display Modules(Chip-On-Glass) Chip-On-Glass (COG LCD Display Modules) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (...
Factory made hot-sale COG LCD Display Modules to United States Factories Detail:
COG LCD Display Modules(Chip-On-Glass) Chip-On-Glass (COG) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (ICs) on glass substrate directly by using Anisotropic Conductive Film (ACF). The pitch of the IC bumps (footprint) can be scaled down according to customers’…
COG LCD Display Modules(Chip-On-Glass)
Chip-On-Glass (COG LCD Display Modules) is a flip chip bonding method which is used for connect assembly of bare integrated circuits (ICs) on glass substrate directly by using Anisotropic Conductive Film (ACF). The pitch of the IC bumps (footprint) can be scaled down according to customers’ requirements (contact pitch of glass substrate). This method reduces the assembly area to the highest possible packing density, which especially important to those applications that space saving is crucial. It allows a cost-effective mounting of driver chips because integrating flex PCB is no longer required. The IC is bonded directly onto the glass substrate and is suitable for handling high-speed or high-frequency signals.
COG LCD Display Modules technology is one of the high-tech mounting methods which use Gold Bump or Flip Chip IC’s, and implemented in most compact applications. Chip-On-Glass integrated circuits were first introduced by Epson. In flip-chip mounting, the IC chip is not packaged but is mounted directly onto the PCB as a bare chip. Because there is no package, the mounted footprint of the IC can be minimized, along with the required size of the PCB. This technology reduces the mounting area and is better suited to handling high-speed or high frequency signals.
COG is primarily used for source driver ICs within TFT display technologies where they are used for LCD, plasma, e-ink, OLED or 3D technologies. This is essential for consumer electronic products such as notebooks, tablets, cameras or mobile phones with the need for small size and light-weight components.
Very economical on size. Chip-On-Glass LCD modules can be as thin as 2 mm.
Cost effective over COB, especially in graphic LCD modules, because reduces the number of IC’s.
More reliable than TAB due to TAB’s weakness in the bond area.
COG can only be used at a certain resolution level where the lines are not too fine. At very fine pitches COG becomes difficult to test, and TAB would be the preferred approach.
It may be more cost-effective to use TAB or COB, if a designer has to integrate a keypad or indicator around the display.
The active area is not centered within the outline but offset, because of the area where the circuits are.
Product detail pictures:
Related Product Guide:
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Factory made hot-sale COG LCD Display Modules to United States Factories, The product will supply to all over the world, such as: Serbia , United States , Eindhoven , When It produced, it making use of the world's major method for reliable operation, a low failure price, it appropriate for Jeddah shoppers choice. Our enterprise. s situated inside the national civilized cities, the website traffic is very hassle-free, unique geographical and financial circumstances. We pursue a "people-oriented, meticulous manufacturing, brainstorm, make brilliant" company philosophy. Strict good quality management, fantastic service, affordable cost in Jeddah is our stand around the premise of competitors. If needed, welcome to make contact with us by our web page or phone consultation, we'll be delighted to serve you.
Alle Informationen zu unseren Produkten: http://bit.ly/Zh023M
Der Siemens Geschirrspüler mit TFT-Display besitzt veschieden Optionen je nach Verschmutzungsgrad, zum Beispiel Schnellreinigung und sparsame Reinigung.
http://www.iceavglobal.com ICE Display Division In this video I am going to prove there is Magic in the Screen and that a ICE Digital Daytime Projection Lens screen can out perform ANY Matt White Screen in the world from any manufacturer in a well lit environment.
In this video we have set up a 82″ Screen ICE Lens screen outdoors and have overlaid a standard Matt White Screen Cloth over a portion of the screen. With out any trickery or enhancements in image enhancement software, we prove without doubt that a 4,000 ANSI projector running with a lamp at 60% of its life already past, delivering a image that to achieve the same on the matt white screen would need to be 40,000 ANSI Lumen brightness. In fact you will see the direct image on the matt white screen is a complete waste of time.
One of the biggest lies and scams every perpetrated world wide by projection companies, integrators and common screen manufacturers is that the only way you can make a projector image brighter is to make the room darker or get a far more powerful projector.
Have you ever asked yourself why has this myth be spread world wide. In the main it is ignorance and that ignorance has a financial underlying aspect. Imagine this, if we can deliver an image that is brighter than a 20,000 ANSI lumen projector costing $100,000 and we can achieve this with a $4,000 projector, its not difficult to understand that there will be far less profit in a lower cost projectors. If it is projector brightness that is the focus, then this is the incorrect starting point, but very few companies understand why is this. The focus that should be asked is how can we achieve an acceptable commercial grade image in a well lit environment. The crucial starting point is the screen. Get the screen correct and everything else will start to fall into place. A ICE Digital Daytime Lens screen compared to a Matt White screen will discard up to 90% of the projector light coming out of the projector in a well lit room and this video clearly proves this fact.
This remarkable patented technology makes the screens perfect for class rooms, meeting rooms. video conference rooms, 3D projection, venue score boards, gymnasiums, museums, weddings, DJ events art galleries. We supply in 4:3. 16:9 and extensive range of sizes.
Even in controlled environments where the environmental light might be reduced the ICE Lens Screens still provide a superior image, so where you might need a 3,000 ansi projector, we can use a 700 ansi projector and still DELIVER A brighter image
Combine this with new generation 20,000 hour projectors at 100- 3,000 ANSI projectors and now you have one of the most affordable ways to achieve large size commercially successful brightness. This has to be one of the most Green friendly AV solutions ever bought together
ICE AV is a specialist company that has expertise in a wide range of technologies and we are able to bring this knowledge and capability to bear on your projects and requirements. We have a strong solution focus and can draw on an extensive product range to deliver value for money and can present the pros and cons for any options, reasons why we recommend. We are not locked in to just one way to resolve your challenges and can expand your horizons, thinking and potential solutions for your needs.
If you are not sure what size best suits your needs give us a call or send an email and wel will advise the best cost effect solution.
About ICE Technology Ltd
ICE AV is a company that consists of Divisions active in the LED sector, Interactive, Projection Display solutions. We manufacture, distribute and partner with companies world wide in creating unique experiences with our portfolio of technologies.
ICE AV has a wide range of innovative Projection screen solutions it can offer clients worldwide to create affordable solutions for a wide variety of applications.
If you would like to discuss in detail about any comments or solutions referred to in this video then we invite you to pick up the phone and give us a call or send an email.
For sales and further information contact
ICE AV Technology Ltd
Digital Display Division
Auckland, New Zealand
Tel +64-9-414 2348
sales at iceavglobal . com
Produced, recorded and copyright held exclusively by ICE AV Technology Ltd, Auckland, New Zealand. Downloading for the purpose of re-editing, re-branding or claiming as your own is strictly forbidden and a breach of our intellectual property. Embedding the link code in a web site is allowed only if full acknowledgement and attribution to ICE AV Technology Ltd is stated. All breaches will be enforced. Thank you for your co-operation.
By Sandra from Cambodia - 2016.04.28 15:45
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Carol from Romania - 2015.02.12 14:52