18 Years Factory offer Household Appliances LCD Display to Bangladesh Manufacturer

Short Description:

Sinda Display Technology Co., Ltd. is one of the best China LCD display  manufacturers and suppliers. We can custom LCD display exactly according to your request. Now we are provide customs display for  instrument like digital panel meter,multimunction meter,elevator, POS machines, LGP Dispenser, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock & Watch, Telecommunications device, Home Appliance, Industrial Contro...


Product Detail

Product Tags

Related Video

Feedback (2)

Using a complete scientific high quality management program, superior high quality and superior faith, we acquire great reputation and occupied this industry for Car Display Screen , LCD Monitor , Custom LCD Display Manufacturer , Our goal is "blazing new ground, Passing Value", in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly!
18 Years Factory offer Household Appliances LCD Display to Bangladesh Manufacturer Detail:

Sinda Display Technology Co., Ltd. is one of the best China LCD display  manufacturers and suppliers. We can custom LCD display exactly according to your request. Now we are provide customs display for  instrument like digital panel meter,multimunction meter,elevator, POS machines, LGP Dispenser, Fuel Dispenser, Oil Dispenser, Gas Dispenser, Flow Meter, KWH Meter, Energy Meter, Water Meter, Gas Meter, Smart Meter, Clock & Watch, Telecommunications device, Home Appliance, Industrial Controller, Car Audio, Color Display Systems and the other industries, Measurement device, UPS, Solar Inverter.


Product detail pictures:


Related Product Guide:

We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for 18 Years Factory offer Household Appliances LCD Display to Bangladesh Manufacturer, The product will supply to all over the world, such as: Honduras , Honduras , Ghana , We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!



The LCDs have a parallel interface, meaning that the microcontroller has to manipulate several interface pins at once to control the display. The interface consists of the following pins:

- A register select (RS) pin that controls where in the LCD’s memory you’re writing data to. You can select either the data register, which holds what goes on the screen, or an instruction register, which is where the LCD’s controller looks for instructions on what to do next.
- A Read/Write (R/W) pin that selects reading mode or writing mode
- An Enable pin that enables writing to the registers
- 8 data pins (D0 -D7). The states of these pins (high or low) are the bits that you’re writing to a register when you write, or the values you’re reading when you read.
- There’s also a display constrast pin (Vo), power supply pins (+5V and Gnd) and LED Backlight (Bklt+ and BKlt-) pins that you can use to power the LCD, control the display contrast, and turn on and off the LED backlight, respectively.

Hardware Required

- Arduino or Genuino Board
- LCD Screen (compatible with Hitachi HD44780 driver)
- Pin headers to solder to the LCD display pins
- 10k ohm potentiometer
- 220 ohm resistor
- hook-up wires
- breadboard

Recommended site to buy the required hardware:

https://goo.gl/HZk1mS

Circuit

Before wiring the LCD screen to your Arduino or Genuino board we suggest to solder a pin header strip to the 14 (or 16) pin count connector of the LCD screen.
To wire your LCD screen to your board, connect the following pins:

LCD VSS pin to Arduino GND
LCD VDD pin to Arduino 5V
LCD RS pin to digital pin 12
LCD RW pin to Arduino GND
LCD Enable pin to digital pin 11
LCD D4 pin to digital pin 5
LCD D5 pin to digital pin 4
LCD D6 pin to digital pin 3
LCD D7 pin to digital pin 2
Additionally, wire a 10k pot to +5V and GND, with it’s wiper (output) to LCD screens VO pin (pin3). A 220 ohm resistor is used to power the backlight of the display, usually on pin 15 (A+) and 16 (K-) of the LCD connector.

The process of controlling the display involves putting the data that form the image of what you want to display into the data registers, then putting instructions in the instruction register. The LiquidCrystal Library simplifies this for you so you don’t need to know the low-level instructions.
The LiquidCrystal library allows you to control LCD displays that are compatible.

Get the Code: https://goo.gl/e4E5vv

Get the reference code:

https://www.arduino.cc/en/Tutorial/HelloWorld

The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
5 Stars By Laurel from Frankfurt - 2015.02.12 14:52
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
5 Stars By Vanessa from Jamaica - 2016.09.22 11:32

Related Products

WhatsApp Online Chat !